An aesthetic marvel
Geekvape has made a habit of producing products that are both beautiful and impressive in their capabilities. The B100 is no exception, as evidenced by its sophisticated lines and leather-covered handle with visible stitching. The result is a device with a futuristic feel.
In addition to leather, zinc alloy and silicon make up this very strong and durable model. The B100 is indeed shock resistant and the IP67 protection rating confirms this. It is also able to resist dust (IP6X certification) and to be immersed in water for 30 minutes at a depth of 1m.
In addition, its dimensions of 121.90 x 49.17 x 33 mm make it easy to carry and easy to hold, another important point.
The B100 kit is also technically a success. It delivers between 5 and 100W of power and is powered by a 21700 or 18650 battery (with the use of the supplied adapter). The battery is charged via a USB Type-C cable (included), although an external battery charger is recommended. The battery is not included in the package. The 21700 battery has a longer battery life and can deliver up to 100W of power.
But the technical qualities of the B100 kit are not limited to that. Bravo to Geekvape who has equipped it with a quadruple vape system. Indeed, the user has the opportunity to place 4 different parts at the top of the box, namely :
- A Boost Pro pod (compatible with Geekvape’s P series coils)
- Aegis Boost Plus pod (compatible with Geekvape B series coils)
- An RDTA
- A 510 adapter to attach the atomizer of his choice
Note that only the Boost Pro pod is delivered with the kit. The Aegis Boost Plus pod, the RDTA and the 510 adapter are not included.
On the subject of performance, we should add that the B100 integrates the Gen 2 chipset and that it offers a temperature control mode.
Adjustable airflow and TFT display
The Boost Pro pod is equipped with an adjustable airflow consisting of 3 air inlets. The airflow penetrates easily and results in the creation of high density vapour clouds.
Finally, a screen is available to the user. A 0.96 inch TFT colour screen that communicates a lot of useful information when vaping.
A 6 ml pod
The pod of the B100 kit has a considerable capacity of 6 ml. It is filled from the side, knows how to make a seal and the user can be reassured about the autonomy of e-liquid.
Finally, the Boost Pro pod is compatible with the manufacturer’s P series coils. 2 are provided :
- A Geekvape P coil (preinstalled) with a value of 0.2 ohm (60-70W)
- A Geekvape P coil with a value of 0.4 ohm (50-60W)
Note that the box accepts coils with a value between 0.1 and 3 ohms.
The B100 kit is therefore a model worthy of Geekvape’s know-how. Powerful, autonomous, transportable and versatile, it will be appreciated by users who like DL draw and large clouds of vapour.
- 1x Geekvape B100 21700
1x Coil Tool
1x Drip Tip
1x USB Cable (Type-C)
2x Geekvape P Series Coil (pre-installed: 0.2 ohm, Spare Coil: 0.4 ohm)
1x Spare Parts Pack
1x 18650 Battery Adapter
- 1x User Manual